Lawrenceville Garage Door

Mobile Garage Door Service

Garage Door Lawrenceville | Lawrenceville Garage Door | Garage Door in Lawrenceville

Call us (678) 301-2445 Lawrenceville Garage Door

Door Closure Problems

A garage door that functions properly is a reassurance since garage doors do not only provide an added layer of privacy, they also provide greater security. Hence, if you experience garage door closure problems, you want to make sure to quickly find out why so that you can fix the problem. You can call a professional garage door company to identify and rectify the problem for you, but you can take a few preliminary steps to determine if you actually have a garage door closure problem before you call a professional to fix a serious problem.

One thing that can happen when you have this problem is that the garage door will close, but when it hits the floor, it will begin to open again. In other instances, it might only close halfway and then reverse. If you are not familiar with garage door problems, it can be difficult to determine why the problem is happening and what can be done to fix it quickly. Ideally, you would want to call a professional, but due to the unpredictable nature of the problem, you might be concerned with not getting the best deal in an emergency situation and you might find that a garage door business charged you an exorbitant price for an easy fix. Therefore, if you are unsure about garage door issues and their repairs, it would be ideal to contact a trusted and high quality garage door service in Lawrenceville, GA to get the best service at the best price.

Garage Door Opener

Talking about what might be causing the problem, the garage door opener can be the root cause. The way you can detect this is by observing the door opener when you operate the garage door. If you close the garage door from the automatic garage door opener, the door might function perfectly until it has to close. At this point, you might notice the garage door opener making odd sounds. In such a case, the garage door opener may be the problem. You may have isolated the problem but it would still be advised that you have a professional take a look since it would be best if a licensed technician were to confirm the problem and address it.

Garage doors have sensors that allow them to function smoothly and safely. When any of those sensors are damaged or slightly obstructed, they can affect the way the door closes. This means that sensors detect anything in the way of the door and reverse the closing mechanism if the sensors are blocked. You might find that something was getting in the way of the sensors, but if everything is clear and the door still reverses halfway through closing, the sensors might be causing the problem.

In such an instance, there are a few things you can do. First, take a look at the sensors and make sure that their path is clear. You can do that by making sure that nothing is in the way of the garage door as it closes. The sensors need to have uninterrupted contact with each other so that they can close the garage door effectively.

Sensors

Once you have done that, take a closer look at the sensors. Since the garage door opens and closes on a daily basis, something as simple as dust on the sensors can interfere with the way the sensors operate. Even a small cobweb can block the lens of the sensors. Clean the sensors and make sure no dust or grime remains. Then check the alignment of the sensors and only do that if you know how to since you do not want to rearrange them if you are not familiar with them. If they are misaligned, that is the reason for the garage door not closing properly, and in such an instance, it would be ideal to get in touch with a licensed garage door company to send over their highly qualified technicians to adjust and realign the sensors for you, inspecting the wiring and the system along with it to make sure everything is functioning correctly.

Limit Settings

Sometimes, garage doors do not close fully because they have limit settings. This means that a limit switch allows a garage door to close only a certain distance along the tracks and that makes it difficult to completely close the garage door. Limit switch screws can be found on the door motor and they can be turned to adjust the distance that the garage door moves in the tracks, if that is what is making it impossible to close the garage door. Even the smallest turn can make a big difference, so make sure you know what you are doing before you decide to tackle this yourself. Even if you do, start with the smallest changes to determine how you need to proceed to make the required adjustment.

Misaligned tracks also make it difficult to close the garage door. Go over the tracks and see if anything seems out of place. Call professionals for this fix since that is your safest bet.

If nothing seems to work, try the wall switch. If the door closes completely, the sensors might be the cause of the issue. Consult a professional and any high quality service will be willing to tackle the problem.

In instances where an electrical component is not working, you may want to use the release cord so that you can manually close the garage door. This is ideal for when you cannot get in touch with a licensed professional to assist you and this can be an emergency fix for garage door closure problems.

If you have gone through every step and still cannot determine the problem, look at the seals of the door. Damaged or worn out seals can make it difficult for a garage door to close properly. Thankfully, this problem has an easy fix where all you have to do is replace the seal and you are good to go.

Lawrenceville Garage Door

Call us now: (678) 301-2445

Choose the best company in the area if you need assistance with this important aspect of your home. Choose the staff at Lawrenceville Garage Door and expect excellence. You can schedule an appointment by calling us at your convenience.

Top